StyroGLASS/HD at 2.4mm thick (G1000), is our heavy duty range of fibreglass sheet we have available.
Our HD range is also available in 4 different widths. Sheet orders are cut off the roll so whether you need just 1 metre or would like a complete roll, StyroMAX can meet your needs! Please use the below chart to find the product that best suits you!
Pricing below is for sheeting cut from the roll. Please enquire for full roll pricing if required.
# Note: A small cut fee is charged per sheet. Shipping and handling fees are also applicable for interstate orders.
|Product||Thickness (mm)||Width (mtr)||Length (mtr)||Weight(Kg / Sqm)||Approx. Bend Radius||Colour||Price/sqm|
|StyroGLASS/HD2.43||2.4||2.43||0 > 59.0||3.4||150mm||White RAL9016||$ 44.44|
|StyroGLASS/HD2.53||2.4||2.53||0 > 59.0||3.4||150mm||White RAL9016||$ 44.44|
|StyroGLASS/HD3.03||2.4||3.03||0 > 59.0||3.4||150mm||White RAL9016||$ 44.44|
|StyroGLASS/HD3.23||2.4||3.23||0 > 59.0||3.4||150mm||White RAL9016||$ 44.44|
Vetroresina has produced Glass Fibre Reinforced Polyester Laminates since 1968. Vetroresina’s laminates are the result of years of experience and continuous technological improvements, and they constitute an extremely versatile product range, They are able to meet the latest market requirements and being an ideal solution to many diverse applications: from motor homes to industrial and commercial vehicles, from cold storage to the building industry, from doors to signage. In Italy Vetroresina has a production capacity of 20,000m2 per day, located on a site which covers 46,000m2.
What is the difference between fibreglass sheet and StyroMAX panel?
StyroMAX Panel is a sandwich panel utilising extruded polystyrene as a core. A fibreglass sheet is just a lining that is used to clad the styrofoam board. The fibreglass sheeting is in most cases added to both sides of the polystyrene.
How long are the fibreglass sheets?
The length of StyroGLASS/HD ranges from 0- 59 metres.
What do you recommend I should use to cut StyroGLASS sheets? Can they be cut with a hand saw or jig saw etc.?
Yes they can but they will tend to chip the fibreglass edge. A fibreglass router bit or a grinder with a cut off blade is best.
Are StyroGLASS sheets a finished panel or do final coatings need to be applied after assembly?
No final coatings are needed. They are high gloss to both faces.
Will the StyroGLASS product bend around curves without cracking or damaging the gel coat?
Yes, our 2mm or 2.4mm product will bend around a radius.
Would fibreglass sheeting be ok for the roof and walls of a wooden frame caravan?